Carrara White Honed White Marble Wall & Floor Tiles
Marble / Multi
The classic in field-tile form: a pristine, luminous white Carrara laced with gossamer-fine grey veining, honed to a sumptuously smooth, light-diffusing matte that reads as understated elegance rather than shine. Each tile carries subtle, organic variation, so both contemporary and heritage schemes gain a living, natural surface. Available in formats from 100 mm tiles up to 1220 x 610 mm and 914 mm slabs, it lends itself to seamless, continuous coverage. The stone suits sweeping entrance floors, luxurious bespoke bathrooms, sophisticated kitchen splashbacks and majestic feature walls, imparting a quiet grandeur wherever it lands. The honed finish keeps floors slip-aware and forgiving of daily wear. Producing from selected Carrara in our own facilities, we sequence and calibrate the tiles so tone and veining flow naturally across large-format runs — the consistency that lets a broad floor or wall read as one continuous white field.
Technical Specifications
| Density | Typical 2,600–2,850 kg/m³ (EN 1936) |
|---|---|
| Water Absorption | Typical 0.1–0.5% by weight (EN 13755) |
| Compressive Strength | Typical 50–95 MPa (EN 1926) |
Available Sizes
| 100 x mm 100 mm x 10mm |
| 305 mm x 100 mm x 10 mm |
| 305 mm x 305 mm x 10 mm |
| 610 mm x 305 mm x 10 mm |
| 610 mm x 610 mm x 10 mm |
| 1220 mm x 610 mm x 10 mm |
| 600 mm x 600 mm x 20 mm |
| 800 mm x 800 mm x 20 mm |
| 914 mm x 914 mm x 20 mm |
| 1200 mm x 600 mm x 20 mm |
Read Before You Specify
- Honed, polished, tumbled or brushed — which finish should you specify?Specify honed for interior floors, tumbled or brushed where the surface gets wet, and polished only where there is no slip requirement. All four start from the same slab; the finish changes grip, how visibly it wears, and how often it needs sealing — not the stone itself.
- Marble or travertine — which should you specify?Specify marble where a polished, low-absorption surface matters, and travertine where texture, grip and warmth matter more. Marble absorbs about 0.15% of its weight in water against travertine at roughly 2.6%, but the two overlap in compressive strength — porosity and strength are separate properties.
Related Products
Selected from the same material family and our newest arrivals.
