Carrara White – Platinum Grey Polished Marble Flower Mosaic Tiles
Marble / Multi
Here the flower motif stays light and reflective: luminous Carrara White oval petals, their snow-white ground traced with gossamer silver, bound by curved diamond clasts and circular nodes of stormy Platinum grey that anchor the botanical geometry in a softer, ash-toned contrast. Where the black version reads bold, this one reads bright and refined. A high-gloss polish magnifies the stone's luminosity, bouncing ambient light across a room for a sense of space and calm grandeur. The intricate mesh of petals and joints adds genuine grip underfoot despite the gloss. It suits cosmetics halls and department-store floors, private washrooms and feature walls in premium residential lobbies. Cut from selected Carrara and Platinum grey in our own facilities, we calibrate each 266 mm sheet so the florals and nodes meet cleanly across large deliveries, where any drift in a pattern this precise would immediately show.
Technical Specifications
| Density | Typical 2,600–2,850 kg/m³ (EN 1936) |
|---|---|
| Water Absorption | Typical 0.1–0.5% by weight (EN 13755) |
| Compressive Strength | Typical 50–95 MPa (EN 1926) |
Available Sizes
| 266 mm x 266 mm |
Read Before You Specify
- Honed, polished, tumbled or brushed — which finish should you specify?Specify honed for interior floors, tumbled or brushed where the surface gets wet, and polished only where there is no slip requirement. All four start from the same slab; the finish changes grip, how visibly it wears, and how often it needs sealing — not the stone itself.
- Marble or travertine — which should you specify?Specify marble where a polished, low-absorption surface matters, and travertine where texture, grip and warmth matter more. Marble absorbs about 0.15% of its weight in water against travertine at roughly 2.6%, but the two overlap in compressive strength — porosity and strength are separate properties.
Related Products
Selected from the same material family and our newest arrivals.
