
Carrara White - Selene Honed Marble Octagon Wall & Floor Tiles
Marble / White
High-contrast geometry defines this octagon tile: large-format octagons of premium Carrara White — a frosted, crystalline canvas veiled in pale smoke and dove grey — pierced by sharply cut cabochons of midnight-charcoal Selene marble that anchor the rhythmic tessellation. A honed finish mutes the reflection of both stones into a velvet-like matte, softening the stark monochrome contrast into architectural restraint. Available at 305, 406 and 610 mm, the octagon-and-dot scales across broad floors and walls. Both marbles are dense and hard-wearing; the multi-jointed format lifts underfoot traction, and the matte face camouflages micro-scuffing — suiting heritage colonnades, country-house reception halls, Michelin washroom floors and fashion-flagship display zones. Producing from selected Carrara and Selene in our own facilities, we calibrate each tile so the octagons and charcoal cabochons align cleanly across large runs, where any drift in a high-contrast geometry would show at once.
Technical Specifications
| Density | Typical 2,600–2,850 kg/m³ (EN 1936) |
|---|---|
| Water Absorption | Typical 0.1–0.5% by weight (EN 13755) |
| Compressive Strength | Typical 50–95 MPa (EN 1926) |
Available Sizes
| 305 mm x 305 mm x 12 mm |
| 406 mm x 406 mm x 12 mm |
| 610 mm x 610 mm x 12 mm |
Read Before You Specify
- Honed, polished, tumbled or brushed — which finish should you specify?Specify honed for interior floors, tumbled or brushed where the surface gets wet, and polished only where there is no slip requirement. All four start from the same slab; the finish changes grip, how visibly it wears, and how often it needs sealing — not the stone itself.
- Marble or travertine — which should you specify?Specify marble where a polished, low-absorption surface matters, and travertine where texture, grip and warmth matter more. Marble absorbs about 0.15% of its weight in water against travertine at roughly 2.6%, but the two overlap in compressive strength — porosity and strength are separate properties.
Related Products
Selected from the same material family and our newest arrivals.











