Equator Wave Marble Tile (305 mm x 610 mm)
Marble / Multi
The precise, parallel linear veining of Equator marble meets a sculptural wave in this tile: the stone's graphic bands of white and silver-graphite are carved into a continuous three-dimensional wave profile, so line and relief play against one another across the surface. The sculpted face creates a mesmerising interplay of light and shadow, delivering architectural intrigue and tactile depth. At 305 x 610 mm the tile suits seamless, sweeping installations. Best specified for walls, where the wave relief reads at its most dramatic, it lends itself to striking feature walls, luxury hotel lobbies, contemporary corporate headquarters and premium residential developments. Producing from selected Equator marble in our own facilities, we calibrate each tile so the wave profile and linear veining align cleanly tile to tile across large runs, holding the continuous flow that a dimensional, linear surface depends on.
Technical Specifications
| Density | Typical 2,600–2,850 kg/m³ (EN 1936) |
|---|---|
| Water Absorption | Typical 0.1–0.5% by weight (EN 13755) |
| Compressive Strength | Typical 50–95 MPa (EN 1926) |
Available Sizes
| 305 mm x 610 mm |
Read Before You Specify
- Honed, polished, tumbled or brushed — which finish should you specify?Specify honed for interior floors, tumbled or brushed where the surface gets wet, and polished only where there is no slip requirement. All four start from the same slab; the finish changes grip, how visibly it wears, and how often it needs sealing — not the stone itself.
- Marble or travertine — which should you specify?Specify marble where a polished, low-absorption surface matters, and travertine where texture, grip and warmth matter more. Marble absorbs about 0.15% of its weight in water against travertine at roughly 2.6%, but the two overlap in compressive strength — porosity and strength are separate properties.
Related Products
Selected from the same material family and our newest arrivals.
