Mix Honed Travertine Hexagon Mosaic Tiles
Travertine / Multi
This honeycomb celebrates travertine's natural range: a mix of soft ivory, sun-drenched beige and deep walnut tones drawn across a generous two-inch hexagon, so each sheet reads as a warm, tonal patchwork rather than a single flat colour. The wider cells give the blend room to breathe and the stone's linear veining space to show. A honed finish keeps the surface velvety and matte, diffusing light for a serene, welcoming warmth. Offered in 100 mm and 305 mm sheets, the pattern scales from detail to broad floors. The matte, slip-aware surface suits bathroom floors and wet rooms as well as splashbacks and textural feature walls in heritage boot rooms or grand entrance halls. Working from our own travertine, we fill, hone and calibrate each sheet so the hexagons hold their spacing and the tonal mix reads balanced across large runs — the consistency that keeps a blended palette from clustering on a big floor.
Technical Specifications
| Density | Typical 2,410–2,720 kg/m³ (EN 1936) |
|---|---|
| Water Absorption | Typical ~2.6% by weight (EN 13755) |
| Compressive Strength | Typical 50–87 MPa (EN 1926) |
Available Sizes
| 100 mm x 100 mm |
| 305 mm x 265 mm |
Read Before You Specify
- Honed, polished, tumbled or brushed — which finish should you specify?Specify honed for interior floors, tumbled or brushed where the surface gets wet, and polished only where there is no slip requirement. All four start from the same slab; the finish changes grip, how visibly it wears, and how often it needs sealing — not the stone itself.
- Marble or travertine — which should you specify?Specify marble where a polished, low-absorption surface matters, and travertine where texture, grip and warmth matter more. Marble absorbs about 0.15% of its weight in water against travertine at roughly 2.6%, but the two overlap in compressive strength — porosity and strength are separate properties.
Related Products
Selected from the same material family and our newest arrivals.
