Valencia Tumbled Travertine Hexagon Mosaic Tile
Travertine / Multi
The tumbled counterpart to its honed relative, this Valencia honeycomb trades smoothness for age: a warm palette of deep caramel, warm biscuit and soft sandy beige across generous two-inch hexagons, each edge delicately worn and the face matted so the linear veining and characteristic natural pitting read as genuine history. Offered in 100 mm and 305 mm sheets, the pattern lays up across floors and walls. The pitted, gently abraded surface earns strong grip underfoot, suiting luxury bathroom floors, wet rooms and showers as well as textural splashbacks and feature walls in heritage boot rooms or grand entrance halls. Working from our own travertine, we fill, tumble and calibrate each sheet so the hexagons hold their spacing and the warm tones read balanced across large runs — the consistency that keeps an aged, blended palette from clustering on a big floor.
Technical Specifications
| Density | Typical 2,410–2,720 kg/m³ (EN 1936) |
|---|---|
| Water Absorption | Typical ~2.6% by weight (EN 13755) |
| Compressive Strength | Typical 50–87 MPa (EN 1926) |
Available Sizes
| 100 mm x 100 mm |
| 305 mm x 265 mm |
Read Before You Specify
- Honed, polished, tumbled or brushed — which finish should you specify?Specify honed for interior floors, tumbled or brushed where the surface gets wet, and polished only where there is no slip requirement. All four start from the same slab; the finish changes grip, how visibly it wears, and how often it needs sealing — not the stone itself.
- Marble or travertine — which should you specify?Specify marble where a polished, low-absorption surface matters, and travertine where texture, grip and warmth matter more. Marble absorbs about 0.15% of its weight in water against travertine at roughly 2.6%, but the two overlap in compressive strength — porosity and strength are separate properties.
Related Products
Selected from the same material family and our newest arrivals.
